Iron Gates & Fencing in New York City

Licensed, Insured, and Trusted for Over 3 Decades in Custom Metal Fabrication.

What’s Covered on This Page

Gates and Fencing Across the Five Boroughs

Automated Driveway Gates

Estate Gates & Perimeter Fencing

Iron Fencing

Security Gates & Window Guards

Frequently Asked Questions

Gates and Fencing Across the Five Boroughs

If you own a home or a storefront in New York City, you’ve probably noticed the ironwork around you: old stoop railings, driveway gates, fences that have held up since your grandparents’ generation, and a few that clearly haven’t.

Gates and fencing sit at the center of what European Custom Iron does every day. We’ve spent over 30 years in iron works and metal fabrication, bringing old-world European quality to every job — whether that’s a single driveway gate or a full perimeter fence line — out of our workshop on Myrtle Avenue in Glendale, Queens.

City lots make this work harder than it looks. Boundaries are narrow, irregular, or shared; driveways are tight; and corner properties answer to different height rules than mid-block ones. Almost nothing here fits a stock panel. So we measure on site and build to the line that’s actually there.

Below you’ll find the gate and fence services we offer. Read through the sections, see which one matches what’s happening at your property, and reach out when you’re ready to talk it through. We offer a free estimate, so you don’t need to have the exact answer before you call.

Automated Driveway Gates

Picture pulling into your driveway without ever getting out of the car to open a gate. That’s what automated driveway gates do. They cover one vehicle entry point and come built with a remote, keypad, intercom, or app control, so you open and close it from the driver’s seat.

Here’s the distinction worth knowing: automated driveway gates handle a single access point, while a full perimeter gate and fence system covers the entire boundary line, often with more than one gate and usually no automation at all. If your driveway is the thing that needs securing and simplifying, this is the service.

Narrow and shared driveway openings are common across the boroughs, and this is the step people tend to underestimate — getting exact measurements before we fabricate anything matters more than most folks expect. We build the gate, and size the automation hardware, to fit your opening precisely rather than to a standard size pulled off a shelf. Swing and sliding designs are both available, with safety sensors fitted as part of the install.

Estate Gates & Perimeter Fencing

Some properties need more than a front gate. If you’ve got a larger lot, or more than one spot where people or vehicles enter, this service covers the whole boundary line instead of a single point. It’s a bigger-scale system than a standard iron fence, built for properties where one gate simply isn’t enough.

Here’s how it compares to its neighbors: automated driveway gates handle one vehicle entry point, iron fencing fits a standard residential lot, and this option is the choice when your property’s size or layout calls for multiple gates along a longer boundary. Properties backing onto parkland, or running a long frontage, often need a full perimeter run to mark that line clearly — a different job from fencing a standard front yard.

We design each gate and fence run to match, so the whole perimeter reads as one system instead of a patchwork of pieces. Gates are automation-ready, with operators, intercoms, and keypad entry fitted where wanted.

Iron Fencing

What does a standard iron fence actually cover? For most homes, it’s the front yard or side yard line — a durable, decorative fence styled to match the house, not a full estate-scale boundary system. City lots are often narrow or irregular in shape, so we measure fence runs on site rather than assembling from stock panels. NYC Department of Buildings rules govern fence height, including different limits for corner lots, and we factor that in when we design your fence line.

Fence styles matched to your home’s existing architecture
On-site measurement for irregular lot lines
Height and corner-visibility rules factored into the design
Hand-forged pickets, decorative finials, and secure ground anchoring
Galvanizing available for high-exposure locations

Iron fencing protects your yard’s perimeter. That’s different from security gates and window guards, which protect one specific opening — a door or a window — rather than the whole property line. If your project is about marking and protecting the yard itself, iron fencing is the right place to start.

Security Gates & Window Guards

Storefronts across the city add security gates for after-hours protection, and plenty of homeowners want that same peace of mind over a ground-floor window.

Security gates and window guards are built to fit one exact opening — a door, a window, or a storefront front — rather than an entire yard line. That’s the key difference from iron fencing, which secures the property perimeter rather than a single point.

We fabricate roll-down gates, swing gates, basement gates, decorative security doors, and code-compliant window guards, all built for daily use rather than for show. A gate that gets opened and closed every business day needs to hold up under that kind of wear, and we build with that in mind from the start. The design side matters too: security ironwork can protect an opening without making the building look institutional.

Frequently Asked Questions

Do you install iron gates and fencing throughout NYC?

Yes. European Custom Iron works across all five boroughs. We measure every lot on site, since so many city properties have narrow, shared, or irregular boundaries. That means no guessing with stock panels or standard gate sizes — we build your gate or fence to match your exact opening and property line.

Can you match new ironwork to my home’s existing style?

Yes. We design fence and gate styles to match your home’s existing architecture, not a one-size-fits-all catalog piece. NYC has an enormous mix of older and newer building stock, so we look at your property in person before we design anything. That keeps the new work looking like it belongs there.

Should I get an automated driveway gate or a full perimeter fence?

It depends on how much of your property you need to secure. Automated driveway gates handle one vehicle entry point with remote or keypad control. A full perimeter system covers your entire boundary line, often with more than one gate. If it’s just your driveway, start with the automated gate.

What’s the difference between iron fencing and security gates?

Iron fencing protects your whole yard’s perimeter, while security gates and window guards protect one specific opening, like a door or window. If you’re marking and securing your yard line, choose iron fencing. If you need to lock down a storefront or a single window, security gates are the right fit.

How do I know if my property needs estate gates instead of a standard fence?

Estate gates and perimeter fencing make sense when your lot is larger or has more than one entry point. A standard iron fence works fine for most front or side yards. Properties with a long frontage, parkland boundaries, or multiple access points often need the bigger system to cover the whole boundary correctly.

How do NYC fence height rules affect my property?

NYC Department of Buildings rules set limits on fence height, and those limits change on corner lots, where visibility requirements are stricter. We factor these rules into your fence design before we build anything, so you don’t run into problems after installation.

Ready to Get Started?

Call European Custom Iron to start your gate or fence project. Ask about a free estimate and we’ll talk through what your property actually needs.

Custom Railings |Commercial Ironwork & Metal Fabrication |Custom Ornamental Ironwork